FlexaBoot.
FlexaBoot is an inexpensive, lightweight, and flexible acoustical sound boot for return air grilles.
FLEXABOOT BENEFITS:
Reduces Room-to-Room Crosstalk and Transfer Noise - Increases Room Privacy
Flexible Design Allows Installation Above Ceilings Without Conflict
Inexpensive and Easy to Install
Less Labor, Shipping, and Handling Costs
FlexaBoot replaces expensive shop fabricated sheet metal boots often shown on plans.
FLEXABOOT FEATURES:
Complete Kit Ready to Install – Available in 16" and 10" Diameters
No Fibrous Materials in Airstream
Five Times Lighter Than Sheet Metal Return Air Boot
U.L. Classified Components - Made in USA
FLEXABOOT FORMS:
CAD DRAWINGS.
INSTALLATION.
SUBMITTAL.
FAQs
-
FlexaBoot provides multiple advantages:
o FlexaBoots cost approximately 50% less compared to sheet metal boots
o Flexibility above ceiling – easy to offset over, under, and around obstacles
o FlexaBoots are acoustically designed and tested - sheet metal boots are not
o No fibrous materials in the air stream
o FlexaBoots weigh 9 lbs each - sheet metal boots weigh approximately 47 lbs each
o All components are U.L classified and made in USA
-
Yes, click here to request “Test Data” for acoustical testing reports.
-
Yes, thousands of FlexaBoots have been accepted and installed through the V.E. process, saving thousands of dollars on numerous projects.
-
The most economical choice is 24x24 perforated face grille with either a 16” round neck or 10” round neck. Square-to-round adaptors allow FlexaBoot to be used with almost all return grilles with 22x22 and 22x12 necks sizes.
-
FlexaBoots are available in 10” and 16” round. The 10” round is typically used with 24x12 face return grilles. The 16” round is typically used with 24x24 face return grilles.
-
Both 16” and 10” FlexaBoots ship two per carton.
-
One hanger per FlexaBoot. Sheet metal boots typically require at least three hangers per boot.